Wholesale OEM/ODM Factory Pe Plastic - Polyethylene PE1000 Rod – UHMWPE – Beyond Manufacturer and Supplier

OEM/ODM Factory Pe Plastic - Polyethylene PE1000 Rod – UHMWPE – Beyond

short description:

Product Detail

Product Tags

Feedback (2)

We're proud from the higher client fulfillment and wide acceptance due to our persistent pursuit of high quality both on product and service for Flat Plastic , Plastic Sheet Suppliers , Hdpe High Density Polyethylene , First business, we learn each other. Further business, the trust is getting there. Our company always at your service at any time.

OEM/ODM Factory Pe Plastic - Polyethylene PE1000 Rod – UHMWPE – Beyond Detail:

Uhmw Pe 1000 Rod :

PE Rod is odourless, non-toxic, feel like wax, has good low temperature resistance (the lowest temperature can reach 70 ~ 100 °C), chemical stability is good, most of acid and alkali erosion (acid) with characteristics of oxidation resistance, temperature does not dissolve in solvents, small water imbibition, excellent electrical insulation properties;Low density;Good toughness, also apply to low temperature conditions);Good stretchability;The electric and dielectric insulation;Bibulous rate is low;The water vapor permeability is low;Good chemical stability;Non-toxic harmless.

But PE Rod for environmental stress (chemical and mechanical effect) is very sensitive, heat aging.

Medical appliance parts, seals, cutting boards, sliding profiles. Widely used in chemical industry, machinery, chemical industry, electric power, clothing, packaging, food and other industries.Widely used in gas transmission, water supply, drainage, irrigation, mines fine particles of solid conveying, and oil field, chemical industry and telecommunications and other fields, especially on the gas supply has been widely used.

Advantges of the uhmwpe rod:

1. Good Tensile strength
2. High impact and anti impact strength
3. High heat deflection temperature
4. High strength and hardness
5. Good glide and soft home characters
6. Good chemical stability against organic solvents and fuels
7. Resistant to thermal aging (applicable temperature between -60°C and 190°C
8. Size alternation by humidity absorption must be considered

cfab82cc49565d5e8aafb0bd049cf9e

Application fields of the uhmwpe ROD:

Wearparts , transmission parts , home appliance parts , automotive parts , wire rod to prevent the machine parts , chemical machinery parts, chemical equipment , such as turbine , gear ,bearing , impeller , shaft , dashboard, drive shaft ,valve , blades , wire rod , high pressure washers , screws ,nuts , seals, shuttle bushing , connector , etc

Rods size

Colour	Rod Length (mm)	Rod Diameter (mm)
-	-	20	25	30	35	40	50	60	65	70	80	90	100
Natural	2000	*	*	*	*	*	*	*	*	*	*	*	*
Natural	1000	*	*	*	*	*	*	*	*	*	*	*	*
Black	2000	*	-	*	-	*	*	*	*	*	*	*	*
Black	1000	*	-	*	-	*	*	*	*	*	*	*	*
Green	2000	*	-	-	-	*	*	*	-	*	*	*	*
Green	1000	*	-	-	-	*	*	*	-	*	*	*	*
Blue	2000	*	-	-	-	*	*	-	-	-	*	-	*
Blue	1000	*	-	-	-	*	*	-	-	-	*	-	*

Colour	Rod Length (mm)	Rod Diameter (mm)
-	-	110	120	130	140	150	160	180	200	230	250	300
Natural	2000	*	*	*	*	*	*	*	*	*	-	-
Natural	1000	*	*	*	*	*	*	*	*	*	*	*
Black	2000	*	*	*	*	*	*	*	*	-	-	-
Black	1000	*	*	*	*	*	*	*	*	*	*	*
Green	2000	*	*	*	*	*	*	*	*	-	-	-
Green	1000	*	*	*	*	*	*	*	*	-	-	-
Blue	2000	-	*	-	-	-	-	-	-	-	-	-
Blue	1000	-	*	-	-	*	-	-	-	-	-	-

Specification of UHMW-PE compared to other Engineering Plastic

Item	Unint	UHMW-PE	ABS	PA-66	POM	PTFE
Density	g/cm^3	0.935	1.03	1.41	1.41	2.14-2.30
Flash Point	ºC	136	165	25	165	327
Friction Factor	–	0.1-0.22	–	0.15-0.40	0.15-0.35	0.04-0.25
Water Absorption Rate	%	<0.01	0.20-0.45	1.5	0.25	<0.02
Tensile Strength	MPa	≥38	22-28	≥80	62-70	15-35
Elongation at Break	%	≥300	≥53	≥60	≥40	200-400
Impact Strength	KJ/m^2	70	≥22	4.5	–	–
Volume Resistivity	Ω.cm	10^17	10^15	5*10^14	10^14	>10^17
Breakdown Potential	KV/mm	50	15	15	20	20
Dielectric Constant	10^6HZ	2.2	2.4	3.7	3.7-3.8	1.8-2.2
Dielectric Loss Tangent	10^6HZ	≤5*10^-4	4*10^-2	2*10^-2	5*10^-2	≤2.5*10^-4

Our Advantages:

A: Experienced uhmwpe products supplier

B: Professional design team and sales department for your service

C: We can provide free small sample or receive small quanty sample order.

D: 8/24 service for you, all the questions will be dealed within 24 hour

E: Stable quality—-coming from good material and technic

F: Lower price—-not cheapest but the lowest at the same quality

G: Good service—-satisfactory service before and after sale

H: Delivery time—-15-20 days for mass production

Product detail pictures:

Related Product Guide:

Persisting in High quality, Prompt Delivery, Aggressive Price, we have established long-term cooperation with clientele from both equally overseas and domestically and get new and old clients' higher comments for OEM/ODM Factory Pe Plastic - Polyethylene PE1000 Rod – UHMWPE – Beyond , The product will supply to all over the world, such as: Dubai, Belize, Barcelona, Our products are widely sold to Europe, USA, Russia, UK, France, Australia, Middle East, South America, Africa, and Southeast Asia, etc. Our solutions are highly recognized by our customers from all around the world. And our company is committed to continually improving effectiveness of our management system to maximize customer satisfaction. We sincerely hope to make progress with our customers and create a win-win future together. Welcome to join us for business!

100% Virgin PE Sheets

Mc Nylon Material Properties

Pe Transparent Sheet

PE Welding Rods

UHMW-PE Plastic Board

This enterprise in the industry is strong and competitive, advancing with the times and develop sustainable, we are very pleased to have a opportunity to cooperate!