Mc Nylon Bars Cast Nylon Rods Sheets Tubes
HOM THIAB SPECIFICATIONS:
| Hom | Thickness (hli) | Dav (mm) | Ntev (mm) |
| Daim ntawv | ≤ 300 | 500 ~ 2000 | 500 ~ 2000 |
| Hom | Txoj kab uas hla (mm) | Ntev (mm) | |
| Qws | 10-800 Nws | 1000 | |
| Extruded Tube | 3 ~ 24 | Txhua Qhov Ntev | |
| Tube | Sab nraud txoj kab uas hla (mm) | Ntev (mm) | |
| 50-1800 Nws | ≤ 1000 | ||
| Xim: | Natural, Dawb, Dub, Ntsuab, Xiav, Daj, Rice Daj, Grey thiab lwm yam. | ||
| Khoom | Yam khoom No. | Chav tsev | MC Nylon (Natural) | Roj Nylon + Carbon (Dub) | Roj Nylon (Green) | MC901 (Xiav) | MC Nylon + MSO2 (Lub teeb dub) |
| 1 | Qhov ntom | g/cm3 | 1.15 | 1.15 | 1.135 Nws | 1.15 | 1.16 |
| 2 | Kev nqus dej (23 ℃ hauv huab cua) | % | 1.8-2.0 Nws | 1.8-2.0 Nws | 2 | 2.3 | 2.4 |
| 3 | Tensile zog | MPa | 89 | 75.3 ib | 70 | 81 | 78 |
| 4 | Tensile strain thaum tawg | % | 29 | 22.7 ib | 25 | 35 | 25 |
| 5 | Compressive stress (ntawm 2% nominal strain) | MPa | 51 | 51 | 43 | 47 | 49 |
| 6 | Charpy Impact lub zog (tsis muaj) | KJ/m2 | Tsis so | Tsis so | ≥50 | Tsis so | Tsis so |
| 7 | Charpy impact zog (notched) | KJ/m2 | ≥5.7 | ≥6.4 | 4 | 3.5 | 3.5 |
| 8 | Tensile modulus ntawm elasticity | MPa | ib 3190 | 3 130 | 3000 | 3200 | 3300 ib |
| 9 | Pob indentation hardness | N2 | 164 | 150 | 145 | 160 | 160 |
| 10 | Rockwell hardness | -- | M88 | M87 | M82 | M85 | M84 |
HOM THIAB SPECIFICATIONS:
-Kev hnav zoo heev
- Zoo zawv zawg zog
-High lub zog thiab toughness
- Lubricating nws tus kheej
-Resistant rau roj, qaug zog acid thiab alkali
- Shock absorption
- Suab nrov absorption
- Cov khoom hluav taws xob zoo
Kev lag luam kev siv:
Gear/worm/cam
bearing
log / pulley / sheave / dab tshos
tes tsho / screws / ceev
washer / bushing
Kev kub siab pipeline
cov thawv ntim khoom
Roj Tank
Qhov no txhim kho MC Nylon, muaj xim xiav xim, uas zoo dua li dav dav PA6 / PA66 hauv kev ua tau zoo ntawm kev ua kom tawv, yoog raws, qaug zog-ua haujlwm thiab lwm yam. Nws yog cov khoom siv zoo tshaj plaws ntawm iav, iav bar, kis iav thiab lwm yam.
MC Nylon ntxiv MSO2 tuaj yeem nyob twj ywm qhov cuam tshuam-ua haujlwm thiab qaug zog-ua haujlwm ntawm casting nylon, nrog rau nws tuaj yeem txhim kho lub peev xwm thauj khoom thiab hnav-ua haujlwm. Nws muaj daim ntawv thov dav hauv kev ua iav, bearing, ntiaj chaw iav, foob lub voj voog thiab lwm yam.
Roj Nylon ntxiv carbon, muaj cov qauv compact thiab siv lead ua, uas zoo dua li cov nylon dav dav hauv kev ua tau zoo ntawm cov neeg kho tshuab siab, hnav-tiv taus, tiv thaiv kev laus, UV tsis kam thiab lwm yam. Nws yog tsim los ua cov kabmob thiab lwm yam khoom siv kho tshuab.
