Ultra-high molecular Weight Polyethylene sheet/board/pannel
Lintlha tsa Sehlahisoa:
UHMWPE LEHLAKOANA: Re ka etsa Leqephe le fapaneng la UHMWPE ho latela litlhoko tse fapaneng ka ts'ebeliso e fapaneng .Joaloka anti-UV, e sa cheng, e thibelang ho tsitsa le litlhaku tse ling. Boleng ba boleng bo botle bo nang le bokaholimo bo botle le mebala bo etsa hore leqephe la rona la UHMWPE le tume le ho feta lefatšeng ka bophara.
| Botenya | 10-260 limilimithara |
| Boemo bo tloaelehileng | 1000 * 2000mm, 1220 * 2440mm, 1240 * 4040mm, 1250 * 3050mm, 1525 * 3050mm, 2050 * 3030mm, 2000 * 6050mm |
| Botenya | 0.96 - 1 g/cm3 |
| Bokaholimo | E boreleli ebile e khabisitsoe (anti-skid) |
| Mmala | Tlhaho, e tšoeu, e ntšo, e mosehla, e tala, e putsoa, e khubelu, joalo-joalo |
| Tshebeletso ya Tshebetso | CNC machining, ho sila, ho bopa, ho etsa le ho kopanya |
SehlahisoaTshebetso:
| Che. | Ntho | Yuniti | Tekanyetso ea Teko | Sephetho |
| 1 | Botenya | g/cm3 | GB/T1033-1966 | 0.95-1 |
| 2 | Mold shrinkage % | ASTMD6474 | 1.0-1.5 | |
| 3 | Elongation nakong ya khefu | % | GB/T1040-1992 | 238 |
| 4 | Matla a tšepe | Mpa | GB/T1040-1992 | 45.3 |
| 5 | Teko ea ho thatafala ha bolo 30g | Mpa | DINISO 2039-1 | 38 |
| 6 | Ho thatafala ha Rockwell | R | ISO868 | 57 |
| 7 | matla a kobehang | Mpa | GB/T9341-2000 | 23 |
| 8 | Matla a ho hatella | Mpa | GB/T1041-1992 | 24 |
| 9 | Static softening temp. | ENISO3146 | 132 | |
| 10 | Mocheso o khethehileng | KJ(Kg.K) | 2.05 | |
| 11 | Matla a amang | KJ/M3 | D-256 | 100-160 |
| 12 | mocheso conductivity | %(m/m) | ISO 11358 | 0.16-0.14 |
| 13 | thepa e thellang le khohlano ea khohlano | PLASTIC/TŠEPE(WET) | 0.19 | |
| 14 | thepa e thellang le khohlano ea khohlano | PLASTIC/TSELE(Omileng) | 0.14 | |
| 15 | Bothata ba lebopo D | 64 | ||
| 16 | Charpy Notched Impact Matla | mJ/mm2 | Ha ho khefu | |
| 17 | Ho monya metsi | Hanyane | ||
| 18 | Mocheso oa ho kheloha mocheso | °C | 85 |
Setifikeiti sa Sehlahisoa:
Papiso ya Tshebetso:
Khanyetso e phahameng ea abrasion
| Lisebelisoa | UHMWPE | PTFE | Nylon 6 | Tšepe A | Polyvinyl fluoride | Tšepe e pherese |
| Reka ea ho Apara | 0.32 | 1.72 | 3.30 | 7.36 | 9.63 | 13.12 |
Lintho tse ntle tsa ho itlotsa, khohlano e tlase
| Lisebelisoa | UHMWPE - mashala | Lahlela lejoe-mashala | E kgabisitsoepoleiti-mashala | E seng e khabisitsoeng ka poleiti-mashala | Leshala la konkreite |
| Reka ea ho Apara | 0.15-0,25 | 0.30-0,45 | 0.45-0.58 | 0.30-0,40 | 0.60-0,70 |
Matla a ts'usumetso e phahameng, boima bo botle
| Lisebelisoa | UHMWPE | Lejoe le betliloeng | PAE6 | POM | F4 | A3 | 45# |
| Tšusumetsomatla | 100-160 | 1.6-15 | 6-11 | 8.13 | 16 | 300-400 | 700 |
Ho paka Sehlahisoa:
Tšebeliso ea Sehlahisoa:
1. Lining: Li-silo, li-hoppers, lipoleiti tse sa senyeheng, li-brackets, li-chute tse kang lisebelisoa tsa reflux, sebaka se thellang, rolara, joalo-joalo.
2. Mechini ea Lijo: Terene ea ho lebela, mabili a linaleli, lisebelisoa tsa tataiso, mabili a rolara, lithaele tse belehang, joalo-joalo.
3. Mochine oa ho etsa pampiri: Letlapa la sekoahelo sa metsi, poleiti ea deflector, plate ea wiper, hydrofoils.
4. Indasteri ea lik'hemik'hale: Letlapa la ho tlatsa tiiso, tlatsa thepa e teteaneng, mabokose a hlobo ea vacuum, likarolo tsa pompo, lithaele tse nang le lithaele, likere, ho tiisa bokaholimo bo kopaneng.
5. Tse ling: Mechini ea temo, likarolo tsa likepe, indasteri ea electroplating, likarolo tsa mochine o tlase haholo oa mocheso o tlase.
