UHWMPE PE1000 Boenjiniere Letlapa la Plastiki
Lintlha tsa Sehlahisoa:
Polyethylene - Ultra-High Molecular Weight
PE1000 e na le khanyetso e phahameng ea abrasion, thepa e ntle ea ho thella le boima bo phahameng. E na le khanyetso e ntle ea lik'hemik'hale, matla a tšusumetso e phahameng le ho monya mongobo o tlase. PE1000 e boetse e lumellana le lijo bakeng sa lits'ebetso tsohle tsa bohlokoa tsa ts'ebetso.
| Mokhoa oa ho sebetsa | Bolelele(mm) | Bophara(mm) | Botenya(mm) |
| Boholo ba Leqephe la Mold | 1000 | 1000 | 10-150 |
|
| 1240 | 4040 | 10-150 |
|
| 2000 | 1000 | 10-150 |
|
| 2020 | 3030 | 10-150 |
| Boholo ba Letlapa la Extrusion | Bophara: botenya＞20mm, boholo bo ka ba 2000mm;Botenya≤20mm, boholo bo ka ba 2800mmBolelele: Botenya bo se nang moeli: 0.5 mm ho isa ho 60 mm | ||
| Mmala wa Leqephe | Tlhaho; botsho; bosoeu; putsoa; botala joalo-joalo | ||
Sebopeho sa Sehlahisoa:
1.Abrasive resistance eo kamehla e nang le thermoelectricity polymer.
2.Molemo ka ho fetisisa oa ho ts'oha ho hanyetsa esita le mocheso o tlaase.
3.Low frictional factor, le lintho tse bonahalang tse thellang hantle.
4.Lubricity(ha ho caking, ka adhesion) .
5.Best lik'hemik'hale kutu ho hanyetsa le khatello ea kelello craze ho hanyetsa.
6.Bokhoni bo botle ba ts'ebetso ea mochini.
7. Ho monya metsi a tlase ka ho fetesisa (<0.01%) .
8.Paragon electric insulativity le boitšoaro ba antistatic .
9. Nice matla a phahameng a radioactive resistance.
10.Density e tlase ho feta thermoplastics tse ling (<1g/m3).
11.E telele ho sebelisoa mefuta e fapaneng ea mocheso: -269°C--85°C.
Teko ea Sehlahisoa:
Khanyetso e phahameng ea abrasion
| Lisebelisoa | UHMWPE | PTFE | Nylon 6 | Tšepe A | Polyvinyl fluoride | Tšepe e pherese |
| Reka ea ho Apara | 0.32 | 1.72 | 3.30 | 7.36 | 9.63 | 13.12 |
Lintho tse ntle tsa ho itlotsa, khohlano e tlase
| Lisebelisoa | UHMWPE - mashala | Lahlela lejoe-mashala | E kgabisitsoe poleiti-mashala | E seng e khabisitsoeng ka poleiti-mashala | Leshala la konkreite |
| Reka ea ho Apara | 0.15-0,25 | 0.30-0,45 | 0.45-0.58 | 0.30-0,40 | 0.60-0,70 |
Matla a ts'usumetso e phahameng, boima bo botle
| Lisebelisoa | UHMWPE | Lejoe le betliloeng | PAE6 | POM | F4 | A3 | 45# |
| Tšusumetso matla | 100-160 | 1.6-15 | 6-11 | 8.13 | 16 | 300-400 | 700
|
Ts'ebetso ea Sehlahisoa:
| Ntho ea Teko | Mokhoa oa Teko | Sephetho |
| Static Coefficient of Friction(ps) | ASTM D1894-14 | 0.148 |
| Kinetic Coefficient of Friction(px) | ASTM D1894-14 | 0.105 |
| Flexural Modulus | ASTM D790-17 | 747MPa |
| Izod Notched Impact Matla | ASTM D256-10C1 Mokhoa oa A | 840J/m P(khefutso e itseng) |
| Bothata ba Lebopo | ASTM D2240-15E1 | D/64/1 |
| Tensile modulus | ASTM D638-14 | 551 MPa |
| Matla a tšepe | ASTM D638-14 | 29.4MPa |
| Elongation at Break | ASTM D638-14 | 3.4 |
Ho paka Sehlahisoa:
Tšebeliso ea Sehlahisoa:
