4 × 8 Plastic Black Polyethylene Mold e Hatelitsoeng UHMWPE Sheets
Lintlha tsa Sehlahisoa:
UHMWPE ke polymer e sebetsang hantle, e tenyetsehang e ka raloang le ho raloa ho fihlela litlhoko tsa hau tsa indasteri. Hore na o batla ho nkela tšepe kapa aluminium sebaka, ho boloka boima ba 'mele, kapa ho fokotsa litšenyehelo, ULeqephe la HMWPEe ka fana ka thepa eo u e hlokang bakeng sa projeke ea hau.
SehlahisoaTshebetso:
| Che. | Ntho | Yuniti | Tekanyetso ea Teko | Sephetho |
| 1 | Botenya | g/cm3 | GB/T1033-1966 | 0.95-1 |
| 2 | Mold shrinkage % | ASTMD6474 | 1.0-1.5 | |
| 3 | Elongation nakong ya khefu | % | GB/T1040-1992 | 238 |
| 4 | Matla a tšepe | Mpa | GB/T1040-1992 | 45.3 |
| 5 | Teko ea ho thatafala ha bolo 30g | Mpa | DINISO 2039-1 | 38 |
| 6 | Ho thatafala ha Rockwell | R | ISO868 | 57 |
| 7 | matla a kobehang | Mpa | GB/T9341-2000 | 23 |
| 8 | Matla a ho hatella | Mpa | GB/T1041-1992 | 24 |
| 9 | Static softening temp. | ENISO3146 | 132 | |
| 10 | Mocheso o khethehileng | KJ(Kg.K) | 2.05 | |
| 11 | Matla a amang | KJ/M3 | D-256 | 100-160 |
| 12 | mocheso conductivity | %(m/m) | ISO 11358 | 0.16-0.14 |
| 13 | thepa e thellang le khohlano ea khohlano | PLASTIC/TŠEPE(WET) | 0.19 | |
| 14 | thepa e thellang le khohlano ea khohlano | PLASTIC/TSELE(Omileng) | 0.14 | |
| 15 | Bothata ba lebopo D | 64 | ||
| 16 | Charpy Notched Impact Matla | mJ/mm2 | Ha ho khefu | |
| 17 | Ho monya metsi | Hanyane | ||
| 18 | Mocheso oa ho kheloha mocheso | °C | 85 |
Setifikeiti sa Sehlahisoa:
Papiso ya Tshebetso:
Khanyetso e phahameng ea abrasion
| Lisebelisoa | UHMWPE | PTFE | Nylon 6 | Tšepe A | Polyvinyl fluoride | Tšepe e pherese |
| Reka ea ho Apara | 0.32 | 1.72 | 3.30 | 7.36 | 9.63 | 13.12 |
Lintho tse ntle tsa ho itlotsa, khohlano e tlase
| Lisebelisoa | UHMWPE - mashala | Lahlela lejoe-mashala | E kgabisitsoepoleiti-mashala | E seng e khabisitsoeng ka poleiti-mashala | Leshala la konkreite |
| Reka ea ho Apara | 0.15-0,25 | 0.30-0,45 | 0.45-0.58 | 0.30-0,40 | 0.60-0,70 |
Matla a ts'usumetso e phahameng, boima bo botle
| Lisebelisoa | UHMWPE | Lejoe le betliloeng | PAE6 | POM | F4 | A3 | 45# |
| Tšusumetsomatla | 100-160 | 1.6-15 | 6-11 | 8.13 | 16 | 300-400 | 700 |
Ho paka Sehlahisoa:
Tšebeliso ea Sehlahisoa:
1. Lining: Li-silo, li-hoppers, lipoleiti tse sa senyeheng, li-brackets, li-chute tse kang lisebelisoa tsa reflux, sebaka se thellang, rolara, joalo-joalo.
2. Mechini ea Lijo: Terene ea ho lebela, mabili a linaleli, lisebelisoa tsa tataiso, mabili a rolara, lithaele tse belehang, joalo-joalo.
3. Mochine oa ho etsa pampiri: Letlapa la sekoahelo sa metsi, poleiti ea deflector, plate ea wiper, hydrofoils.
4. Indasteri ea lik'hemik'hale: Letlapa la ho tlatsa tiiso, tlatsa thepa e teteaneng, mabokose a hlobo ea vacuum, likarolo tsa pompo, lithaele tse nang le lithaele, likere, ho tiisa bokaholimo bo kopaneng.
5. Tse ling: Mechini ea temo, likarolo tsa likepe, indasteri ea electroplating, likarolo tsa mochine o tlase haholo oa mocheso o tlase.
