HDPEpolasetiki e tsebahala haholo ebile e bitsoaLetlapa la HDPEpolasetiki. Thermoplastic ena e entsoe ka letoto la limolek'hule tsa ethylene (ka hona, karolo ea polyethylene), 'me e tsebahala ka ho ba bobebe hape e matla. Kaha lik'hamphani tse ntseng li eketseha li amohela mehato ea ts'ebetso, botumo ba maqephe a HDPE bo eketsehile kaha bo ka fokotsa thepa e sebelisoang ho hlahisa le ho paka lihlahisoa ka lebaka la boima ba eona le matla a eona.
Tlhaloso:
| Mofuta | extruded |
| Boholo | 1000 * 2000mm kapa 1220 * 2440mm |
| Botenya | 1---200mm |
| Botenya | 0.96 g/cm³ |
| Mmala | Bosoeu / botsho / boputsoa / botala / bosehla |
| Lebitso la lebitso | FEELA |
| Lintho tse bonahalang | 100% lintho tse bonahalang |
| Mohlala | MAHALA |
| Ho hanyetsa asiti | EE |
| Ketone Resistance | EE |
Lethathamo la Boitsebiso ba 'Mele:
| Ntho | Letlapa la HDPE |
| Mmala | Bosoeu / Botsho / Botala |
| Tekanyo | 0.96g/cm³ |
| Ho hanyetsa mocheso (ho tsoela pele) | 90 ℃ |
| Ho hanyetsa mocheso (nako e khutšoanyane) | 110 |
| Sebaka se qhibilihang | 120 ℃ |
| Mocheso oa phetoho ea khalase | _ |
| Molaetsa oa katoloso ea mocheso oa mocheso(karolelano ea 23 ~ 100℃) | 155×10-6m/(mk) |
| Flammability(UI94) | HB |
| (Ho inela ka metsing ka mocheso oa 23 ℃ | 0.0001 |
| Bend tensile stress/ Ho tsitsipana maikutlo ho tlohang ho tshoha | 30/-Mpa |
| Tensile modulus ea elasticity | 900MPa |
| Khatello ea maikutlo ea khatello e tloaelehileng - 1%/2% | 3/-MPa |
| Coefficient ea likhohlano | 0.3 |
| Ho thatafala ha Rockwell | 62 |
| Matla a dielectric | >50 |
| Ho hanyetsa molumo | ≥10 15Ω×cm |
| Ho hanyetsa bokahodimo | ≥10 16Ω |
| Dielectric e amanang le kamehla-100HZ/1MHz | 2.4/- |
| Bonding bokgoni | 0 |
| Ho kopana le lijo | + |
| Ho hanyetsa asiti | + |
| Ho hanyetsa alkali | + |
| Ho hanyetsa metsi a carbonated | + |
| Ho hanyetsa motsoako o monko o monate | 0 |
| Ho hanyetsa ketone | + |
Nako ea poso: Jul-05-2023
