High density extruded PE Sheet
Thepa
● Mokhoa o mong oa moruo ho fapana le PE 1000
● Ho apara ka mokhoa o babatsehang le ho hanyetsa abrasion
● Lintho tse ntle tsa ho fokotsa lerata
● Ho lumellana le lijo
Lisebelisoa
● Mapolanka a sehang
● Chutes Liners
● Ho lokisa lijo
● Likarolo tsa ketane
Letlapa la 'mele:
| Ntho | Letlapa la HDPE (Polyethylene). |
| Mofuta | extruded |
| Botenya | 0.5---200mm |
| Boholo | (1000-1500)x(1000-3000)mm |
| Mmala | Bosoeu / Botsho / Botala (bosehla) /blue |
| Tekanyo | 0.96g/cm³ |
| Ho hanyetsa mocheso (ho tsoela pele) | 90 ℃ |
| Ho hanyetsa mocheso (nako e khutšoanyane) | 110 |
| Sebaka se qhibilihang | 120 ℃ |
| Mocheso oa phetoho ea khalase | _ |
| Molaetsa oa katoloso ea mocheso oa mocheso | 155×10-6m/(mk) |
| (karolelano ea 23 ~ 100℃) | |
| Ka karolelano 23--150 ℃ | |
| Flammability(UI94) | HB |
| Tensile modulus ea elasticity | 900MPa |
| Ho inela ka metsing ka mocheso oa 23 ℃ bakeng sa 24h | _ |
| Ho kenella ka metsing ka mocheso oa 23 ℃ | 0.01 |
| Bend tensile stress/ Ho tsitsipana maikutlo ho tlohang ho tshoha | 30/-Mpa |
| Ho qhekella ho phefumoloha | _ |
| Khatello ea maikutlo ea khatello e tloaelehileng - 1%/2% | 3/-MPa |
| Teko ea phello ea lekhalo la pendulum | _ |
| Coefficient ea likhohlano | 0.3 |
| Ho thatafala ha Rockwell | 62 |
| Matla a dielectric | >50 |
| Ho hanyetsa molumo | ≥10 15Ω×cm |
| Ho hanyetsa bokahodimo | ≥10 16Ω |
| Dielectric e amanang le kamehla-100HZ/1MHz | 2.4/- |
| Critical tracking index(CTI) | _ |
| Bonding bokgoni | 0 |
| Ho kopana le lijo | + |
| Ho hanyetsa asiti | + |
| Ho hanyetsa alkali | + |
| Ho hanyetsa metsi a carbonated | + |
| Ho hanyetsa motsoako o monko o monate | 0 |
| Ho hanyetsa ketone | + |
