OEM manufacturer Ultra High Molecular Weight Pe - Polyethylene PE1000 Rod – UHMWPE – Beyond

short description:

Product Detail

Product Tags

Feedback (2)

abide by the contract, conforms to the market requirement, joins in the market competition by its high quality as well as provides more comprehensive and excellent service for clients to let them become big winner. The pursue of the company, is the clients' satisfaction for Nylon Bushings , Plastic Sheet Materials , Hard Plastic Boards , We have been wanting ahead to setting up cooperative associations along with you. Make sure you contact us for more data.

OEM manufacturer Ultra High Molecular Weight Pe - Polyethylene PE1000 Rod – UHMWPE – Beyond Detail:

Uhmw Pe 1000 Rod :

PE Rod is odourless, non-toxic, feel like wax, has good low temperature resistance (the lowest temperature can reach 70 ~ 100 °C), chemical stability is good, most of acid and alkali erosion (acid) with characteristics of oxidation resistance, temperature does not dissolve in solvents, small water imbibition, excellent electrical insulation properties;Low density;Good toughness, also apply to low temperature conditions);Good stretchability;The electric and dielectric insulation;Bibulous rate is low;The water vapor permeability is low;Good chemical stability;Non-toxic harmless.

But PE Rod for environmental stress (chemical and mechanical effect) is very sensitive, heat aging.

Medical appliance parts, seals, cutting boards, sliding profiles. Widely used in chemical industry, machinery, chemical industry, electric power, clothing, packaging, food and other industries.Widely used in gas transmission, water supply, drainage, irrigation, mines fine particles of solid conveying, and oil field, chemical industry and telecommunications and other fields, especially on the gas supply has been widely used.

Advantges of the uhmwpe rod:

1. Good Tensile strength
2. High impact and anti impact strength
3. High heat deflection temperature
4. High strength and hardness
5. Good glide and soft home characters
6. Good chemical stability against organic solvents and fuels
7. Resistant to thermal aging (applicable temperature between -60°C and 190°C
8. Size alternation by humidity absorption must be considered

cfab82cc49565d5e8aafb0bd049cf9e

Application fields of the uhmwpe ROD:

Wearparts , transmission parts , home appliance parts , automotive parts , wire rod to prevent the machine parts , chemical machinery parts, chemical equipment , such as turbine , gear ,bearing , impeller , shaft , dashboard, drive shaft ,valve , blades , wire rod , high pressure washers , screws ,nuts , seals, shuttle bushing , connector , etc

Rods size

Colour	Rod Length (mm)	Rod Diameter (mm)
-	-	20	25	30	35	40	50	60	65	70	80	90	100
Natural	2000	*	*	*	*	*	*	*	*	*	*	*	*
Natural	1000	*	*	*	*	*	*	*	*	*	*	*	*
Black	2000	*	-	*	-	*	*	*	*	*	*	*	*
Black	1000	*	-	*	-	*	*	*	*	*	*	*	*
Green	2000	*	-	-	-	*	*	*	-	*	*	*	*
Green	1000	*	-	-	-	*	*	*	-	*	*	*	*
Blue	2000	*	-	-	-	*	*	-	-	-	*	-	*
Blue	1000	*	-	-	-	*	*	-	-	-	*	-	*

Colour	Rod Length (mm)	Rod Diameter (mm)
-	-	110	120	130	140	150	160	180	200	230	250	300
Natural	2000	*	*	*	*	*	*	*	*	*	-	-
Natural	1000	*	*	*	*	*	*	*	*	*	*	*
Black	2000	*	*	*	*	*	*	*	*	-	-	-
Black	1000	*	*	*	*	*	*	*	*	*	*	*
Green	2000	*	*	*	*	*	*	*	*	-	-	-
Green	1000	*	*	*	*	*	*	*	*	-	-	-
Blue	2000	-	*	-	-	-	-	-	-	-	-	-
Blue	1000	-	*	-	-	*	-	-	-	-	-	-

Specification of UHMW-PE compared to other Engineering Plastic

Item	Unint	UHMW-PE	ABS	PA-66	POM	PTFE
Density	g/cm^3	0.935	1.03	1.41	1.41	2.14-2.30
Flash Point	ºC	136	165	25	165	327
Friction Factor	–	0.1-0.22	–	0.15-0.40	0.15-0.35	0.04-0.25
Water Absorption Rate	%	<0.01	0.20-0.45	1.5	0.25	<0.02
Tensile Strength	MPa	≥38	22-28	≥80	62-70	15-35
Elongation at Break	%	≥300	≥53	≥60	≥40	200-400
Impact Strength	KJ/m^2	70	≥22	4.5	–	–
Volume Resistivity	Ω.cm	10^17	10^15	5*10^14	10^14	>10^17
Breakdown Potential	KV/mm	50	15	15	20	20
Dielectric Constant	10^6HZ	2.2	2.4	3.7	3.7-3.8	1.8-2.2
Dielectric Loss Tangent	10^6HZ	≤5*10^-4	4*10^-2	2*10^-2	5*10^-2	≤2.5*10^-4