UHWMPE PE1000 Engineering Plastic Sheet
Detail Produk:
Polyethylene - Bobot Molekul Ultra-dhuwur
PE1000 nduweni resistensi abrasi sing dhuwur, sifat geser sing apik lan ketangguhan sing dhuwur. Nduwe resistance kimia sing apik, kekuatan impact dhuwur lan panyerepan kelembapan sing kurang. PE1000 uga cocog karo panganan kanggo kabeh aplikasi pangolahan kritis.
| Metode Pengolahan | dawa (mm) | Jembar (mm) | Ketebalan (mm) |
| Ukuran Lembar Cetakan | 1000 | 1000 | 10-150 |
|
| 1240 | 4040 | 10-150 |
|
| 2000 | 1000 | 10-150 |
|
| 2020 | 3030 | 10-150 |
| Ukuran Lembar Ekstrusi | Jembar: kekandelan＞20mm, maks bisa 2000mm；ketebalan≤20mm，maks bisa 2800mmLength: unlimitedKetebalan: 0.5mm nganti 60mm | ||
| Warna Lembaran | Alamiah; ireng; putih; biru; ijo lan liya-liyane | ||
Fitur produk:
1.Abrasive resistance kang tansah ing thermoelectricity Polymer.
2. Resistance kejut paling apik sanajan ing suhu sing kurang.
3. faktor gesekan Low, lan uga ngusapake prewangan materi.
4. Lubricity (ora caking, ing adhesion).
5.Best resistance karat kimia lan kaku craze resistance.
6. Kemampuan proses mesin sing apik banget.
7. panyerepan banyu paling (<0,01%) .
8. Paragon insulativity listrik lan prilaku antistatic.
9. Nice energi dhuwur resistance radioaktif.
10. Kapadhetan luwih murah tinimbang termoplastik liyane (< 1g/m3).
11. Long nggunakake sawetara suhu: -269 ° C--85 ° C.
Pengujian produk:
resistance abrasion dhuwur
| Bahan | UHMWPE | PTFE | Nilon 6 | Baja A | Polivinil fluorida | Baja ungu |
| Wear Rate | 0.32 | 1.72 | 3.30 | 7.36 | 9.63 | 13.12 |
Sifat pelumasan sing apik, gesekan sing sithik
| Bahan | UHMWPE - batu bara | Cast stone-coal | Bordir piring-batu bara | Ora bordir piring-batu bara | Batu bara beton |
| Wear Rate | 0.15-0.25 | 0.30-0.45 | 0.45-0.58 | 0.30-0.40 | 0.60-0.70 |
Kekuwatan impact dhuwur, kateguhan apik
| Bahan | UHMWPE | Batu tuang | PAE6 | POM | F4 | A3 | 45# |
| Dampak kekuwatan | 100-160 | 1.6-15 | 6-11 | 8.13 | 16 | 300-400 | 700
|
Kinerja produk:
| Item Tes | Metode Tes | asil |
| Koefisien gesekan statis (ps) | ASTM D1894-14 | 0.148 |
| Koefisien Gesekan Kinetik (px) | ASTM D1894-14 | 0.105 |
| Modulus lentur | ASTM D790-17 | 747 MPa |
| Izod Notched Impact Strength | ASTM D256-10C1 Metode A | 840J/m P (putus parsial) |
| Hardness Shore | ASTM D2240-15E1 | D/64/1 |
| Modulus Tarik | ASTM D638-14 | 551 MPa |
| Kekuwatan Tensile | ASTM D638-14 | 29.4MPa |
| Elongation ing Break | ASTM D638-14 | 3.4 |
Produk Packing:
Aplikasi produk:
