Mpempe akwụkwọ Polyethylene dị elu dị elu (HDPE/PE300) Onye nrụpụta na onye na-eweta ngwaahịa

Mpempe akwụkwọ Polyethylene njupụta dị elu (HDPE/PE300)

Mpempe akwụkwọ polyethylene dị elu (HDPE/PE300) egosipụtara

nkowa nkenke:

Polyethylene njupụta dị elu (HDPE/PE300)
Njupụta dị eluPolyethylene- a na-akpọkwa HDPE,PE300polyethylene ọkwa - nwere mmetụta dị mma nke ukwuu, ọbụlagodi na okpomọkụ dị ala -30ºC. Ejikọta ya na ọnụ ọgụgụ dị ala nke esemokwu na ịdị mfe nke ịmepụta, High Density Polyethylene bụ nke a na-ejikarị eme ihe na ụgbọ ala, ntụrụndụ na ngwa mmepụta ihe ma dị mma maka ịmepụta tankị, silos, hoppers wdg.

Akwa njupụta Polyethylene na-adịkwa mfe welded na nnukwu maka igwe. Polyethylene njupụta dị elu nwere oke ọrụ na-arụ ọrụ nke +90ºC.

Zitere anyị email Ekwentị Email

Nkọwa ngwaahịa

Mkpado ngwaahịa

Nkọwa:

Polyethylene PE300 mpempe akwụkwọ - HDPE bụ rọba injinịa dị fechaa na nke siri ike nke nwere mmetụta dị elu. Ọ nwekwara ezigbo nguzogide kemịkalụ yana nnabata mmiri dị ala yana FDA kwadoro. Enwere ike imepụta HDPE na ịgbado ya. Polyethylene PE300 mpempe akwụkwọ.

Akụkụ ndị dị mkpa:

N'ịbụ nke e mere ka ọ bụrụ otu n'ime plastik kachasị mma n'ụwa, nnukwu njupụta polyethylene na-enye ọtụtụ uru dị iche iche. Emebere HDPE anyị ka ọ bụrụ ogologo oge, mmezi dị ala, yana nchekwa. Ihe FDA kwadoro maka iji ya na ụlọ ọrụ nhazi nri, ọ na-enyekwa uru agbakwunyere nke ịbụ mmiri mmiri, ntụpọ, na isi na-eguzogide.

Na mgbakwunye na ọtụtụ uru ndị edepụtara n'elu, HDPE na-eguzogide corrosion, nke pụtara na ọ naghị agbaji, ire ere, ma ọ bụ na-ejigide nje bacteria na-emerụ ahụ. Isi ihe a, yana nguzogide ihu igwe ya, na-eme HDPE zuru oke maka ojiji na mpaghara na-ezute mmiri, kemịkalụ, ihe mgbaze na mmiri ndị ọzọ.

A makwaara HDPE nwere nnukwu ike na oke njupụta (nke sitere na 0.96 ruo 0.98 g), mana ọ na-agbaze ngwa ngwa ma nwee ike ịkpụzi. Enwere ike ịkpụ ya n'ụzọ dị mfe, kpụọ ya, kee ya, na welded na/ma ọ bụ n'usoro n'usoro iji zute nkọwapụta achọrọ nke ọtụtụ ngwa.

N'ikpeazụ, dị ka ọtụtụ plastik arụpụtara, HDPE na-adị mfe ịmegharị ma nwee ike inye aka belata ihe mkpofu na mmepụta plastik nke ukwuu.

Nka nka:

Ihe	Nsonaazụ	UNIT	PARAMETER	NORM eji
Ngwa igwe
Modul nke elasticity	1000	MPa	Na esemokwu	DIN EN ISO 527-2
Modul nke elasticity	1000-1400	MPa	Na mgbanwe	DIN EN ISO 527-2
Ike tensile na mkpụrụ	25	MPa	50 mm/min	DIN EN ISO 527-2
Ike mmetụta (Charpy)	140	Kj/m 2	Oke. 7,5j
Mmetụta mmetụta emetụtaghị. (Charpy)	Enweghị ezumike	Kj/m 2	Oke. 7,5j
Isi ike ntinye bọọlụ	50	MPa		ISO 2039-1
Ike mgbawa na-akpụ akpụ	12,50	MPa	Mgbe awa 1000 gachara, ibu static 1% elong. mgbe 1000 awa Megide ígwè p=0,05 N/mm 2
Ogologo mkpụrụ oge	3	MPa
Ọnụọgụ nke esemokwu	0,29	------

Njirimara okpomọkụ
Igwe mgbanwe okpomọkụ	-95	Celsius C		DIN 53765
Ebe mgbaze kristal	130	Celsius C		DIN 53765
Okpomọkụ ọrụ	90	Celsius C	Obere oge
Okpomọkụ ọrụ	80	Celsius C	Ogologo oge
Mgbasa ọkụ ọkụ	13-15	10-5K-1		DIN 53483
Okpomọkụ akọwapụtara	1,70 - 2,00	J/(g+K)		ISO 22007-4: 2008
Thermal conductivity	0,35 - 0,43	W/(K+m)		ISO 22007-4: 2008
Okpomọkụ agbagọ	42-49	Celsius C	Usoro A	R75
Okpomọkụ agbagọ	70-85	Celsius C	Usoro B	R75

Nha mpempe akwụkwọ:

Na gafere Plastics, HDPE dị n'ọtụtụ nha, ụdị, ọkpụrụkpụ, na agba. Anyị na-enyekwa ọrụ ịbelata CNC iji nyere gị aka ịbawanye mkpụrụ gị wee belata ọnụ ahịa gị niile.

Ngwa:

N'ihi ngbanwe nke polyethylene dị elu, ọtụtụ ndị na-emepụta na-eji HDPE dochie ihe ochie ha dị arọ. A na-eji ngwaahịa a gafee ọtụtụ ụlọ ọrụ gụnyere nhazi nri, ụgbọ ala, mmiri, ntụrụndụ, na ndị ọzọ!

Ngwongwo HDPE na-eme ka ọ bụrụ nnukwu nhọrọ maka ngwa ime ụlọ na n'èzí, gụnyere:

Ahịrị ọkpọ na ihe nfefe
Mpekere osisi
Ngwongwo n'èzí
Eriri ejizi ihe na akụrụngwa
Akara ngosi, ihe ndozi na ihe ngosi
N'ime ihe ndị ọzọ, a na-ejikwa HDPE na karama, efere ịgba, tankị mmanụ ọkụ, mkpuchi mkpuchi, akụrụngwa egwuregwu, nkwakọ ngwaahịa, tankị mmiri, ngwa nhazi nri, akwa mkpuchi, na ụgbọ mmiri, RV, na ime ụgbọ ala mberede.

Anyị nwere ike ịnye UHMWPE / HDPE / PP / PA / POM / mpempe akwụkwọ dị iche iche dị iche iche na ngwa dị iche iche.

Anyị na-atụ anya nleta gị.

Nke gara aga: Uhmwpe Plastic Marine Fender Pad

Osote: Mpempe akwụkwọ HDPE - Mpempe akwụkwọ plastik HDPE